Page Comparison

Table of Contents

General Information
1.1 Hardware Compatibility
1.2 Technical Specification
1.3 Electrical and Mechanical Prerequisites
1.4 Pin Cable Connector for Vision Components MIPI CSI camera modules
1.4.1 Flexible Printed Circuit (FPC) Cable
1.5 MIPI Sensor Module Circuit
1.6 Trigger Timing
Ordering Information
2.1 MIPI camera module order numbers
2.2 Order numbers of MIPI camera module Accessories
Appendix A: Dimensions MIPI camera module
3.1 VC MIPI IMX296 (same board dimensions for OV9281, OV7251, IMX290, IMX297, IMX327, IMX335, IMX412, IMX415, IMX568)
3.2 VC MIPI IMX183 (same board dimensions for IMX250, IMX252, IMX264, IMX265, IMX392)
3.3 VC MIPI IMX226 (same board dimensions for IMX178, IMX273)

1. General Information

1.1 Hardware Compatibility

MIPI-Modules can be connected to a number of different computer boards like the

Raspberry Pi 3, 3B, 3B+, 4B (with a 22-to-15 FPC cable)
Raspberry Compute Module - CMIO Rev. 3.0 and 4.0 (with a 22pin FPC cable)
Asus Tinker board (with a 22-to-15 FPC cable)
96boards computer boards (with 22pin FPC cable and the VC MIPI 96 Adapter Board, EK003348)
Nvidia Jetson TX2 development board (with 15pin FPC cable and Auvidea J20 adapter board)
Nvidia Jetson Nano development board (directly with 15pin FPC cable)
Nvidia Jetson Xavier NX development board (directly with 15pin FPC cable)
Nvidia Jetson AGX Xavier development board (with 15pin FPC cable and Auvidea J20 adapter board)
Trenz Electronic ZynqBerry TE0726 SoC module (directly with 15pin FPC cable)
Toradex Verdin iMX8M Mini

Info
VC performs compatibility tests for a number of boards on a regular basis and publishes the results. However, no guarantee for the sensor hardware compatibility for any third party board can be given.

1.2 Technical Specification

Please note that the achievable frame and data transmission rates depend on the number of lanes and/or the capabilities of the receiving endpoint. The fps shown at the table are the maximum possible values for the MIPI modules.

Technical Data:
VC MIPI OV7251, VC MIPI OV9281

Component / Feature	Module Name	Module Name
	VC MIPI OV7251	VC MIPI OV9281
CMOS Sensor	1/4" Omnivision OV7251, Monochrome, 0.3 Mpixel	1/4" Omnivision OV9281, Monochrome, 1.02 Mpixel
Active pixels	640(H) x 480(V)	1280(H) x 800(V)
Pixel size	3(H) x 3(V) µm	3(H) x 3(V) µm
Active sensor size	1.92(H) x 1.44(V) mm	3.840(H) x 2.400(V) mm
Shutter type	Global shutter	Global shutter
ADC Resolution	8 bit / 10 bit	8 bit / 10 bit
CSI-2 output	1 lane / RAW 8 or RAW 10	2 lane / RAW 8 or RAW 10
CSI-2 maximum speed	800 Mbps/lane max.	800 Mbps/lane max.
CSI-2 default speed	800 Mbps/lane	800 Mbps/lane
Max fps (full resolution)	104 fps	120 fps / 60 fps externally triggered
Output modes	streaming mode	streaming mode, trigger mode
Shutter resolution	in streaming mode: 1 horizontal unit	in streaming mode: 1 horizontal unit, in trigger mode: 1 horizontal unit
Gain	analog and digital gain	analog and digital gain
S/N ratio	38dB	38dB
dynamic range	68dB	68dB
HDR	No	No
CRA	29 degrees	9 degrees
ROI / cropping support	Yes, but no speed increase	Yes, but no speed increase
Binning / subsampling support	No	2x2 Binning [R]
Reverse modes	No	for vertical or horizontal: normal or inverted readout
Trigger input	No	Yes in trigger mode
Flash output	Yes	Yes
Power consumption	90mA(@3.3V) typical, 100mA(@3.3V) max. when active	80mA(@3.3V) typical, 100mA(@3.3V) max. when active
Standby current	35mA Hardware	20mA Hardware, 30mA Software
Operating temperature	-30 ... +70 deg C, non-condensing	-30 ... +85 deg C, non-condensing
Storage temperature	-30 ... +70 deg C	-40 ... +85 deg C
Performance guarantee temperature	0 ... +50 deg C	0 ... +50 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	2.6g	2.6g

Technical Data:
VC MIPI IMX178, VC MIPI IMX183/VC MIPI IMX183 C, VC MIPI IMX226/VC MIPI IMX226 C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX178	VC MIPI IMX183/VC MIPI IMX183 C	VC MIPI IMX226/VC MIPI IMX226 C
CMOS Sensor	1/1.8" Sony IMX178, Monochrome, 6.3 Mpixel	1" Sony IMX183, Mono/color, 20.2 Mpixel	1/1.7" Sony IMX226, Mono/color, 12.4 Mpixel
Active pixels	3072(H) x 2076(V)	5440(H) x 3648(V)	3840(H) x 3046(V)
Pixel size	2.4(H) x 2.4(V) µm	2.40(H) x 2.40(V) µm	1.85(H) x 1.85(V) µm
Active sensor size	7.430(H) x 4.992(V) mm	13.305(H) x 8.865(V) mm	7.533(H) x 5.635(V) mm
Shutter type	Rolling Shutter with Global Reset	Rolling Shutter with Global Reset	Rolling Shutter with Global Reset
ADC Resolution	8 Bit / 10 Bit / 12 Bit / 14 Bit	10 Bit / 12 Bit	10 Bit / 12 Bit
CSI-2 output	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10, 12 or 14	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10 or 12	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10 or 12
CSI-2 maximum speed	1.5 Gbps/lane max.	1.5 Gbps/lane max.	1.5 Gbps/lane max.
CSI-2 default speed	1.5 Gbps/lane	1.5 Gbps/lane	1.5 Gbps/lane
Max fps (full res., 4 lanes)	58.2 fps at 8/10 Bit, 51.3 fps at 12 Bit, 30.2 fps at 14 Bit	26.9 fps at 8 and 10 Bit / 22.5 fps at 12 Bit	43.6 fps at 8 and 10 Bit / 36.3 fps at 12 Bit
Output modes	streaming mode, fast trigger mode	streaming mode, fast trigger mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–24dB analog gain + 0–24dB digital gain	0–27dB analog gain + 0–18dB digital gain	0–27dB analog gain + 0–18dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	Yes	No	No
CRA	n/a	3 degrees	9 degrees
ROI / cropping support	Yes, but no speed increase	Yes	Yes, but no speed increase
Binning / subsampling support	No	No	No
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	Yes	Yes	Yes
Flash output	Yes	Yes	Yes
Power consumption	250mA(@3.3V) max. when active	320mA(@3.3V) max. when active	250mA(@3.3V) max. when active
Standby current	110mA	80mA	75mA
Operating temperature	-30 to +85 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +85 deg C, non-condensing
Storage temperature	-40 to +85 deg C	-30 to +80 deg C	-40 to +85 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	5.3g	7.4g	5.7g

Technical Data:
VC MIPI IMX250/VC MIPI IMX250 C, VC MIPI IMX252/VC MIPI IMX252 C

Component / Feature	Module Name	Module Name
	VC MIPI IMX250/VC MIPI IMX250 C	VC MIPI IMX252/VC MIPI IMX252 C
CMOS Sensor	2/3" Sony IMX250, Mono/color, 5.01 Mpixel	1/1.8" Sony IMX252, Mono/color, 3.15 Mpixel
Active pixels	2448(H) x 2048(V)	2048(H) x 1536(V)
Pixel size	3.45(H) x 3.45(V) µm	3.45(H) x 3.45(V) µm
Active sensor size	8.446(H) x 7.066(V) mm	7.066(H) x 5.299(V) mm
Shutter type	Global Shutter	Global Shutter
ADC Resolution	8 Bit / 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit
CSI-2 output	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10 or 12	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10 or 12
CSI-2 maximum speed	1.5 Gbps/lane max.	1.5 Gbps/lane max.
CSI-2 default speed	1.5 Gbps/lane	1.5 Gbps/lane
Max fps (full res., 4 lanes)	101.3 fps at 8 Bit / 82.5 fps at 10 Bit / 69.5 fps at 12 Bit	151.4 fps at 8 Bit / 123.5 fps at 10 Bit / TBD fps at 12 Bit
Output modes	streaming mode, fast trigger mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	1 horizontal unit
Gain	0–24dB analog gain + 0–24dB digital gain	0–24dB analog gain + 0–24dB digital gain
S/N ratio	n/a	n/a
dynamic range	n/a	n/a
HDR	No	No
CRA	3 degrees	3 degrees
ROI / cropping support	Yes, but no speed increase	Yes
Binning / subsampling support	2x2 Binning [R]	2x2 Binning [R]
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	Yes	Yes
Flash output	Yes	Yes
Power consumption	450mA(@3.3V) max. when active	450mA(@3.3V) max. when active
Standby current	85mA	85mA
Operating temperature	-30 to +85 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-40 to +85 deg C	-30 to +80 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	7.5g	7.5g

Technical Data:
VC MIPI IMX264/VC MIPI IMX264C, VC MIPI IMX265/VC MIPI IMX265C, VC MIPI IMX273/VC MIPI IMX273 C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX264/VC MIPI IMX264C	VC MIPI IMX265/VC MIPI IMX265C	VC MIPI IMX273/VC MIPI IMX273 C
CMOS Sensor	2/3" Sony IMX264, Mono/color, 5.1 Mpixel	1/1.8" Sony IMX265, Mono/color, 3.2 Mpixel	1/2.9" Sony IMX273, Mono/color, 1.56 Mpixel
Active pixels	2432(H) x 2048(V)	2048(H) x 1536(V)	1440(H) x 1080(V)
Pixel size	3.45(H) x 3.45(V) µm	3.45(H) x 3.45(V) µm	3.45(H) x 3.45(V) µm
Active sensor size	8.390(H) x 7.066(V) mm	7.065(H) x 5.299(V) mm	4.970(H) x 3.726(V) mm
Shutter type	Global Shutter	Global Shutter	Global Shutter
ADC Resolution	8 Bit / 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit
CSI-2 output	2 lanes / RAW 8, 10 or 12	2 lanes / RAW 8, 10 or 12	2 lanes / 4 lanes (not 15pin connector) / RAW 10 or RAW 12
CSI-2 maximum speed	1.5 Gbps/lane max.	1.5 Gbps/lane max.	1.5 Gbps/lane max.
CSI-2 default speed	1.5 Gbps/lane	1.5 Gbps/lane	1.5 Gbps/lane
Max fps (full res., 4 lanes)	35.5 fps at 8, 10 and 12 Bit	55.3 fps at 8, 10 and 12 Bit	276.0 fps at 8 Bit / 226.5 fps at 10 Bit / 165.9 fps at 12 Bit
Output modes	streaming mode, fast trigger mode	streaming mode, fast trigger mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–24dB analog gain + 0–24dB digital gain	0–24dB analog gain + 0–24dB digital gain	0–24dB analog gain + 0–24dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	No	No	No
CRA	n/a	n/a	1.8 degrees
ROI / cropping support	Yes, but no speed increase	Yes, but no speed increase	Yes
Binning / subsampling support	2x2 Binning [R]	2x2 Binning [R]	2x2 Binning
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	Yes	Yes	Yes
Flash output	Yes	Yes	Yes
Power consumption	400mA(@3.3V) max. when active	330mA(@3.3V) max. when active	360mA(@3.3V) max. when active
Standby current	85mA	85mA	85mA
Operating temperature	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-30 to +80 deg C	-30 to +80 deg C	-30 to +80 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	7.5g	7.5g	5.5g

Technical Data:
VC MIPI IMX290, VC MIPI IMX296/VC MIPI IMX296 C, VC MIPI IMX297

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX290	VC MIPI IMX296/VC MIPI IMX296 C	VC MIPI IMX297
CMOS Sensor	1/2.8" Sony IMX290, monochrome, 2.0 Mpixel	1/2.9" Sony IMX296, Mono/color, 1.56 Mpixel	1/2.9" Sony IMX297, Mono, 0.39 Mpixel
Active pixels	1920(H) x 1080(V) (full HD)	1440(H) x 1080(V)	720(H) x 540(V)
Pixel size	2.90(H) x 2.90(V) µm	3.45(H) x 3.45(V) µm	6.90(H) x 6.90(V) µm
Active sensor size	5.617(H) x 3.181(V) mm	4.968(H) x 3.726(V) mm	4.968(H) x 3.726(V) mm
Shutter type	Rolling Shutter	Global shutter	Global shutter
ADC Resolution	10 Bit	10 Bit	10 Bit
CSI-2 output	2 lanes / 4 lanes (not 15pin connector) / RAW 10	1 lane / RAW 10	1 lane / RAW 10
CSI-2 maximum speed	891 Mbps/lane max.	1.2 Gbps/lane max.	1.2 Gbps/lane max.
CSI-2 default speed	891 Mbps/lane	1.2 Gbps/lane	1.2 Gbps/lane
Max fps (full resolution)	120 fps at 10 Bit	60.3 fps	120 fps
Output modes	streaming mode	streaming mode, fast trigger mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	in streaming mode: 1 horizontal unit, in fast trigger mode: 18.5nsec	in streaming mode: 1 horizontal unit, in fast trigger mode: 18.5nsec
Gain	0–30dB analog gain + 0–42dB digital gain	0–24dB analog gain + 0–24dB digital gain	0–24dB analog gain + 0–24dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	Yes: digital overlap HDR + multiple exposure HDR	No	No
CRA	6.14 degrees	1.8 degrees	1.8 degrees
ROI / cropping support	Yes, but no speed increase	Yes	Yes, but no speed increase
Binning / subsampling support	No	2x2 Binning (simultaneous ROI-mode not supported)	No
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	No	Yes in fast trigger mode	Yes in fast trigger mode
Flash output	No	Yes in fast trigger mode	Yes in fast trigger mode
Power consumption	200mA(@3.3V) max. when active	230mA(@3.3V) max. when active	230mA(@3.3V) max. when active
Standby current	30mA	25mA	25mA
Operating temperature	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-30 to +80 deg C	-40 to +85 deg C	-40 to +85 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	3.1g	3.9g	3.9g

Technical Data:
VC MIPI IMX327 C, VC MIPI IMX335/VC MIPI IMX335C, VC MIPI IMX392/VC MIPI IMX392 C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX327 C	VC MIPI IMX335/VC MIPI IMX335C	VC MIPI IMX392/VC MIPI IMX392 C
CMOS Sensor	1/2.8" Sony IMX327 (better ver. of IMX290), color, 2.0 Mpixel	1/2.8" Sony IMX335, Mono/color, 5.0 Mpixel	1/2.3" Sony IMX392, Mono/color, 2.3 Mpixel
Active pixels	1920(H) x 1080(V) (full HD)	2560(H) x 1964(V)	1920(H) x 1200(V)
Pixel size	2.90(H) x 2.90(V) µm	2.0(H) x 2.0(V) µm	3.45(H) x 3.45(V) µm
Active sensor size	5.617(H) x 3.181(V) mm	5.120(H) x 3.928(V) mm	6.679(H) x 4.195(V) mm
Shutter type	Rolling Shutter	Rolling Shutter	Global Shutter
ADC Resolution	10 Bit	10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit
CSI-2 output	2 lanes / 4 lanes (not 15pin connector) / RAW 10	2 lanes / 4 lanes (not 15pin connector) / RAW 10 or RAW 12	2 lanes / 4 lanes (not 15pin connector) / RAW 8, 10 or 12
CSI-2 maximum speed	891 Mbps/lane max.	1.35 Mbps/lane max.	1.5 Gbps/lane max.
CSI-2 default speed	891 Mbps/lane	1.35 Mbps/lane	1.5 Gbps/lane
Max fps (full res., 4 lanes)	60 fps at 10 Bit	60 fps at 10 Bit / TBD fps at 12 Bit (4 lanes)	201.7 fps at 8 Bit / 167.0 fps at 10 Bit / 134.4 fps at 12 Bit
Output modes	streaming mode	streaming mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–30dB analog gain + 0–42dB digital gain	0–30dB analog gain + 0–42dB digital gain	0–24dB analog gain + 0–24dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	Yes: digital overlap HDR + multiple exposure HDR	Yes: digital overlap HDR + multiple exposure HDR	No
CRA	6.14 degrees	n/a	2.24 degrees
ROI / cropping support	Yes, but no speed increase	Yes, but no speed increase	Yes, but no speed increase
Binning / subsampling support	No	No	2x2 Binning [R]
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	No	No	Yes
Flash output	No	No	Yes
Power consumption	200mA(@3.3V) max. when active	110mA(@3.3V) max. when active	400mA(@3.3V) max. when active
Standby current	30mA	30mA	85mA
Operating temperature	-30 to +85 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-40 to +85 deg C	-30 to +80 deg C	-30 to +80 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	3.1g	2.6g	7.5g

Technical Data:
VC MIPI IMX412 C, VC MIPI IMX415/VC MIPI IMX415 C, VC MIPI IMX568/VC MIPI IMX462 C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX412 C	VC MIPI IMX415/VC MIPI IMX415 C	VC MIPI IMX462 C
CMOS Sensor	1/2.3" Sony IMX412, color, 12.3 Mpixel	1/2.8" Sony IMX415, Mono/color, 8.3 Mpixel	1/2.8" Sony IMX462 (better ver. of IMX327), color, 2.0 Mpixel
Active pixels	4056(H) x 3040(V)	3840(H) x 2160(V)	1920(H) x 1080(V)
Pixel size	1.55(H) x 1.55(V) µm	1.45(H) x 1.45(V) µm	2.90(H) x 2.90(V) µm
Active sensor size	6.287(H) x 4.712(V) mm	5.602(H) x 3.155(V) mm	5.617(H) x 3.181(V) mm
Shutter type	Rolling Shutter	Rolling Shutter	Rolling Shutter
ADC Resolution	10 Bit / 12 Bit	10 Bit / 12 Bit	10 Bit
CSI-2 output	2 lanes / 4 lanes (not 15pin connector) / RAW 10 or RAW 12	2 lanes / 4 lanes (not 15pin connector) / RAW 10 or RAW 12	2 lanes / 4 lanes (not 15pin connector) / RAW 10
CSI-2 maximum speed	2.1 Gbps/lane max.	1.5 Gbps/lane max.	891 Mbps/lane max.
CSI-2 default speed	1.35 Gbps/lane	1.5 Gbps/lane	891 Mbps/lane
Max fps (full res., 4 lanes)	40 fps at 10 Bit / 20 fps at 12 Bit	60 fps at 10 Bit	120 fps at 10 Bit
Output modes	streaming mode	streaming mode	streaming mode
Shutter resolution	1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–27dB analog gain + 0–24dB digital gain	0–30dB analog gain + 0–42dB digital gain	0–30dB analog gain + 0–42dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	Yes: DOL HDR (digital overlap HDR)	Yes: DOL HDR (digital overlap HDR) + multiple exposure HDR	Yes: digital overlap HDR + multiple exposure HDR
CRA	12 degrees	6.12 degrees	6.14 degrees
ROI / cropping support	Yes, but no speed increase	Yes, but no speed increase	Yes
Binning / subsampling support	No	No	No
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical: normal or inverted readout
Trigger input	No	No	No
Flash output	No	No	No
Power consumption	200mA(@3.3V) max. when active	220mA(@3.3V) max. when active	200mA(@3.3V) max. when active
Standby current	30mA	30mA	30mA
Operating temperature	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-30 to +80 deg C	-30 to +80 deg C	-40 to +85 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	3.0g	3.2g	3.1g

Technical Data:
VC MIPI IMX565/VC MIPI IMX565C, VC MIPI IMX566/VC MIPI IMX566C,
VC MIPI IMX567/VC MIPI IMX567C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX565/VC MIPI IMX565C	VC MIPI IMX566/VC MIPI IMX566C	VC MIPI IMX567/VC MIPI IMX567C
CMOS Sensor	1/1.1" Sony IMX565, Mono/color, 12.4 Mpixel	12/2.83" Sony IMX415IMX566, Mono/color, 8.3 Mpixel	1/1.8" Sony IMX568IMX567, Mono/color, 5.1 Mpixel
Active pixels	4128(H) x 3008(V)	38402856(H) x 21602848(V)	2472(H) x 2064(V)
Pixel size	2.74(H) x 2.74(V) µm	12.4574(H) x 12.4574(V) µm	2.74(H) x 2.74(V) µm
Active sensor size	11.223(H) x 8.220(V) mm5	7.602825(H) x 37.155(803 V) mm	x6.xxx773(H) x x5.xxx655(V) mm
Shutter type	Global Shutter	Rolling Global Shutter	Global Shutter
ADC Resolution	8 Bit / 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit
CSI-2 output	2 lanes/ 4 lanes / RAW 8, 10 or 12	2 lanes/ 4 lanes (not 15pin connector) / RAW 8, 10 or RAW 12	2 lanes/ 4 lanes / RAW 8, 10 or 12
CSI-2 maximum speed	1.2 Gbps/lane max.	1.5 2 Gbps/lane max.	1.2 Gbps/lane max.
CSI-2 default speed	1.2 Gbps/lane	1.5 2 Gbps/lane	1.2 Gbps/lane
Max fps (full res., 4 lanes)	42.3 fps at 8 Bit / 34.3 fps at 10 Bit / 28.9 fps at 12 Bit	60 62.7 fps at 8 Bit / 51.2 fps at 10 Bit / 43.2 fps at 12 Bit	9697.2 0 fps at 8 Bit / 79.0 4 fps at 10 Bit / 6667.7 2 fps at 12 Bit
Output modes	streaming mode, fast trigger mode	streaming mode, fast trigger mode	streaming mode, fast trigger mode
Shutter resolution	1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–24dB analog gain + 24–48dB digital gain	0–30dB 0–24dB analog gain + 0–42dB 24–48dB digital gain	0–24dB analog gain + 24–48dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	No	No	Yes: DOL HDR (digital overlap HDR) + multiple exposure HDR	No
CRA	n/a	6.12 degreesn/a	n/a
ROI / cropping support	Yes	Yes, but no speed increase	Yes
Binning / subsampling support	Yes: 2x2 binning / Yes	Yes: 2x2 binning / Yes	Yes: 2x2 binning / Yes
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readout
Trigger input	Yes	NoYes	Yes
Flash output	Yes	NoYes	Yes
Power consumption	350mA(@3.3V) max. when active	220mA350mA(@3.3V) max. when active	180mA210mA(@3.3V) max. when active
Standby current	50mA	30mA50mA	45mA50mA
Operating temperature	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-30 to +80 deg C	-30 to +80 deg C	-30 to +80 deg C
Performance guarantee temperature	-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	5.8g	35.2g8g3	5.5g8g

Technical Data:
VC MIPI IMX568/VC MIPI IMX568C, VC MIPI IMX900/VC MIPI IMX900C

Component / Feature	Module Name	Module Name	Module Name
	VC MIPI IMX565VC MIPI IMX568/VC MIPI IMX565CIMX568C	VC MIPI IMX566/VC MIPI IMX566C	VC MIPI IMX567/VC MIPI IMX567CVC MIPI IMX900/VC MIPI IMX900C
CMOS Sensor	1/21.38" Sony IMX412IMX568, Mono/color, 125.3 1 Mpixel	1/23.81" Sony IMX415IMX900, Mono/color, 83.3 2 Mpixel	1/1.8" Sony IMX568, Mono/color, 5.1 Mpixel
Active pixels	40562472(H) x 30402064(V)	38402048(H) x 2160(V)2472(H) x 20641536(V)
Pixel size	12.5574(H) x 1.55(V) µm1.45(H) x 1.45(2.74(V) µm	2.7425(H) x 2.7425(V) µm
Active sensor size	6.287773(H) x 45.712655(V) mm	54.602608(H) x 3.155(V) mmx.xxx(H) x x.xxx(456 V) mm
Shutter type	Rolling Shutter	Rolling Global Shutter	Global Shutter
ADC Resolution	10 8 Bit / 12 Bit 10 Bit / 12 Bit	8 Bit / 10 Bit / 12 Bit
CSI-2 output	2 lanes/ 4 lanes (not 15pin connector) / RAW 8, 10 or RAW 12	2 lanes/ 4 lanes (not 15pin connector) / RAW 10 or RAW 122 lanes/ 4 lanes / RAW 8, 10 or 12
CSI-2 maximum speed	2.1 Gbps/lane max.1.5 .2 Gbps/lane max.	1.2 Gbps/lane max.
CSI-2 default speed	1.35 Gbps/lane1.5 2 Gbps/lane	1.2 Gbps/lane
Max fps (full res., 4 lanes)	40 97.0 fps at 10 8 Bit / 20 79.4 fps at 12 Bit60 10 Bit / 67.2 fps at 10 12 Bit	96.2 100 fps at 8 Bit / 79.0 TBD fps at 10 Bit / 66.7 TBD fps at 12 Bit
Output modes	streaming modestreaming , fast trigger mode	streaming mode, fast trigger mode
Shutter resolution1 horizontal unit	1 horizontal unit	1 horizontal unit
Gain	0–27dB analog gain + 0–24dB digital gain0–30dB analog gain + 0–42dB 24–48dB digital gain	0–24dB analog gain + 24–48dB digital gain
S/N ratio	n/a	n/a	n/a
dynamic range	n/a	n/a	n/a
HDR	Yes: DOL HDR (digital overlap HDR)	Yes: DOL HDR (digital overlap HDR) + multiple exposure HDR	No	No
CRA	12 degrees	6.12 degreesn/a	n/a
ROI / cropping support	Yes, but no speed increase	Yes, but no speed increaseYes
Binning / subsampling support	No No		YesYes: 2x2 binning / Yes	Yes: 2x2 binning / Yes
Reverse modes	for vertical or horizontal: normal or inverted readout	for vertical or horizontal: normal or inverted readoutfor vertical: normal or inverted readout
Trigger input	No	NoYes	Yes
Flash output	No	NoYes	Yes
Power consumption	200mA(@3.3V) max. when active	220mAconsumption	180mA(@3.3V) max. when active180mA	230mA(@3.3V) max. when active
Standby current	30mA45mA	30mA	45mA25mA
Operating temperature	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing	-30 to +75 deg C, non-condensing
Storage temperature	-30 to +80 deg C	-30 to +80 deg C	-30 to +80 deg C
Performance guarantee temperature-10 to +60 deg C	-10 to +60 deg C	-10 to +60 deg C
Supply voltage	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)	3.3V +/- 5% at input of module (not including voltage drop on cable)
Mass	3.0g5g	3.2g3.5g9g

[R]

Note
Implementing a color calibration routine for color sensors is recommended!

1.3 Electrical and Mechanical Prerequisites

Before connecting, make sure that the pinout of the computer board fits the pinout of the MIPI module, especially the power supply (3V3) and GND pins. In 2014 a number of boards for the Compute Module IO (CMIO) have been sold with reverse pinout which may damage the MIPI Module and the Compute Module when connected. If in doubt contact the manufacturer or the dealer of the computer board. Vision Components can not take resposibility for incorrect pin-outs, changes and modifications of third party manufacturers.

Always use the original Vision Components FPC cable for connecting the MIPI Modules! FPC cables are available with 15 pin or 22 pin header on one side. The MIPI module side always has 22 pins. The original FPC cables connect the signal traces on one side and have a GND shield on the other side. Flat cables with only the signal wires without shielding are not suitable for this purpose.

Note
Please be aware that using the FPC cable with 15 pin on one side limits the number of MIPI data lanes to 2 (instead of 4 for the FPC cable with 22 pins on both sides). This may lead to lower frame rates than specified.

Make sure to connect the correct side of the cable with the MIPI Module. The correct side for the MIPI Module is marked "sensor side".

Due to the high transmission rate of about 1.5 Gbit/sec per lane the cable length is limited to 200mm. Using a repeater board the cable length can be doubled to 400mm.

1.4 Pin Cable Connector for Vision Components MIPI CSI camera modules

Data signals are compliant to MIPI CSI 2. Not all of the 4 lanes are supported for all sensor modules, e.g.:

Raspberry Pi Compute Module IO V3.0: CAM0 connector supports 2 lanes only; CAM1 connector supports 4 lanes
Raspberry Pi Zero V1.3 and Raspberry Pi 3B+ support 2 lanes only

1.4.1 Flexible Printed Circuit (FPC) Cable

Panel

panelIconId	atlassian-warning
panelIcon	:warning:
bgColor	#FF8F73

At the time of writing the schematics of the models 'Raspberry Pi CMIO V3.0' and the 'Raspberry Pi Zero V1.3' have the pin numbering of the MIPI sensor connector in a wrong, inverse order, so pin 1 would be pin 22, pin 2 would be pin 21, …

Always check cable numbering when connecting the sensor boards to hardware not from Vision Components!
Vision Components is not liable to any damages by connecting to incompatible hardware!

Panel

panelIconId	atlassian-warning
panelIcon	:warning:
bgColor	#FF8F73

Always use an original Vision Components FPC cable! The correct function is not guaranteed with 3rd party cables.
FPC cable can only be used in one direction!

FPC Cable Signals

Signal	Sensor module	Processor board (22 Pin)		Processor board (15 Pin)
Type		regular	inverse	regular
GND	1	22	1	1
CSI_DAT0_N	2	21	2	2
CSI_DAT0_P	3	20	3	3
GND	4	19	4	4
CSI_DAT1_N	5	18	5	5
CSI_DAT1_P	6	17	6	6
GND	7	16	7	7
CSI_CLK_N	8	15	8	8
CSI_CLK_P	9	14	9	9
GND	10	13	10	10
CSI_DAT2_N	11	12	11	—
CSI_DAT2_P	12	11	12	—
GND	13	10	13	—
CSI_DAT3_N	14	9	14	—
CSI_DAT3_P	15	8	15	—
GND	16	7	16	—
trigger_to_sensor [1] [2]	17	6	17	11
flash_from_sensor [1] [2]	18	5	18	12
GND	19	4	19	—
I2C_SCL [2]	20	3	20	13
I2C_SDA [2]	21	2	21	14
Vcc3V3	22	1	22	15

[1](1, 2) not supported for all sensor modules.

[2](1, 2, 3, 4) signals have 3.3V LVTTL/LVCMOS level.

`1.4.1.1 FPC Cable End to MIPI Camera Sensor`

`1.4.1.2 FPC Cable End to Processor Board`

Note
No tension is allowed on the FPC cable, on either side! This can lead to mechanical damage!

`1.5 MIPI Sensor Module Circuit`

1.6 Trigger Timing
Some sensors have fast trigger input capability and flash output for synchronizing LED flashes. The following figure explains the timing of the signals.
Trigger timing by sensor type
Time VC MIPI OV9281 VC MIPI IMX296
trigger duration t_T >9 μs >10 μs
trigger delay d_E 0.832 ms 5 us due to debouncing
trigger delay jitter 42 ns max. 18.5 ns max.
exposure duration t_E programmable step size 18.5 ns
flash duration t_F programmable t_F = t_E
2   Ordering Information
2.1   MIPI camera module order numbers
VC MIPI camera modules
Order Number Product ID Service description
VK000469 VC MIPI OV7251 monochrome
VK000436 VC MIPI OV9281 monochrome
VK004005 VC MIPI IMX178 monochrome
VK000477 VC MIPI IMX183 monochrome
VK000482 VC MIPI IMX183 C color
VK000478 VC MIPI IMX226 monochrome
VK000499 VC MIPI IMX226 C color
VK000481 VC MIPI IMX250 monochrome
VK000492 VC MIPI IMX250 C color
VK004002 VC MIPI IMX252 monochrome
VK000493 VC MIPI IMX252 C color
VK000511 VC MIPI IMX264 monochrome
VK000512 VC MIPI IMX264C color
VK000514 VC MIPI IMX265 monochrome
VK000513 VC MIPI IMX265C color
VK000487 VC MIPI IMX273 monochrome
VK000495 VC MIPI IMX273 C color
VK000438 VC MIPI IMX290 monochrome
VK000434 VC MIPI IMX296 monochrome
VK003315 VC MIPI IMX296 C color
VK003316 VC MIPI IMX297 monochrome
VK000435 VC MIPI IMX327 C color
VK000503 VC MIPI IMX335 monochrome
VK000538 VC MIPI IMX335C monochrome
VK004003 VC MIPI IMX392 monochrome
VK000494 VC MIPI IMX392 C color
VK000437 VC MIPI IMX412 C color
VK000498 VC MIPI IMX415 monochrome
VK000449 VC MIPI IMX415 C color
VK000543 VC MIPI IMX568 monochrome
VK000565 VC MIPI IMX568C color
VK000601 VC MIPI IMX900 monochrome
VK000609 VC MIPI IMX900C color
2.2   Order numbers of MIPI camera module Accessories
Accessories for VC MIPI camera modules
Order Number Product / Service description
EK003260 Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 22 Pin
EK003261 Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 15 Pin
EK004418 Flexible Printed Circuit (FPC) Cable, 100 mm: 22 to 22 Pin
EK040001 Flexible Printed Circuit (FPC) Cable, 60 mm: 22 to 22 Pin
VK000057 S-Mount Lens Holder for OV7251, OV9281, IMX290, IMX296, IMX297, IMX327, IMX335, IMX412, IMX415 (no IR filter)
VK000545 S-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (with IR-Cut filter 750 nm)
VK000568 S-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (no IR filter)
VK000555 S-Mount Lens Holder for IMX178, IMX226, IMX273, IMX568 (no IR filter)
VK000454 CS-/C-Mount Lens Holder for OV7251, OV9281, IMX290, IMX296, IMX297, IMX327, IMX335, IMX412, IMX415 (no IR filter)
VK000483 C-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (no IR filter)
VK000491 CS-/C-Mount Lens Holder for IMX178, IMX226, IMX273, IMX568 (no IR filter)
VK000021 Lens, S-Mount Monochrome, f=8.0
VK000252 Lens, S-Mount Monochrome, f=3.6, F=1.8, 2–3 MPx
EK002697 Lens, S-Mount Monochrome, f=8.0, F=5.6
VK003117 Lens, S-Mount Monochrome, f=8.0, F=2.5, 1:1.8" macro
VK003137 Lens, S-Mount Monochrome, f=6.0, F=2.4, 1:2", 2–3 MPx
VK002066 Lens, S-Mount Monochrome, f=12.0, F=2.8, 1:2.5", 5 MPx
VK001256 Lens, S-Mount Color (IR filter), f=2.4, F=2.0, 1:3"
EK000625 Circular IR-Cut Filter Glass 750 nm, d=16 mm
EK003348 VC MIPI 96 Adapter Board for '96' Boards
VK003318 VC MIPI Repeater Board

`3 Appendix A: Dimensions MIPI camera module`

The illustrations below show the general dimensions of the mipi modules but with specific sensors. Please contact our support at support@vision-components.com to get drawings or STEP files for your specific module.

`3.1 VC MIPI IMX296 (same board dimensions for OV9281, OV7251, IMX290, IMX297, IMX327, IMX335, IMX412, IMX415, IMX568)`

`3.2 VC MIPI IMX183 (same board dimensions for IMX250, IMX252, IMX264, IMX265, IMX392)`

3.3   VC MIPI IMX226 (same board dimensions for IMX178, IMX273)
3.4   VC MIPI IMX565 (same board dimensions for IMX566, IMX567)
Image Added

Versions Compared

Old Version 17

New Version Current

Key

1. General Information

1.1 Hardware Compatibility

1.2 Technical Specification

[R]

1.3 Electrical and Mechanical Prerequisites

1.4 Pin Cable Connector for Vision Components MIPI CSI camera modules

1.4.1 Flexible Printed Circuit (FPC) Cable

`1.4.1.1 FPC Cable End to MIPI Camera Sensor`

`1.4.1.2 FPC Cable End to Processor Board`

`1.5 MIPI Sensor Module Circuit`

1.6 Trigger Timing

2 Ordering Information

2.1 MIPI camera module order numbers

2.2 Order numbers of MIPI camera module Accessories

`3 Appendix A: Dimensions MIPI camera module`

`3.1 VC MIPI IMX296 (same board dimensions for OV9281, OV7251, IMX290, IMX297, IMX327, IMX335, IMX412, IMX415, IMX568)`

`3.2 VC MIPI IMX183 (same board dimensions for IMX250, IMX252, IMX264, IMX265, IMX392)`

3.3 VC MIPI IMX226 (same board dimensions for IMX178, IMX273)

3.4 VC MIPI IMX565 (same board dimensions for IMX566, IMX567)

Time	VC MIPI OV9281	VC MIPI IMX296
trigger duration t_T	>9 μs	>10 μs
trigger delay d_E	0.832 ms	5 us due to debouncing
trigger delay jitter	42 ns max.	18.5 ns max.
exposure duration t_E	programmable	step size 18.5 ns
flash duration t_F	programmable	t_F = t_E

Order Number	Product ID	Service description
VK000469	VC MIPI OV7251	monochrome
VK000436	VC MIPI OV9281	monochrome
VK004005	VC MIPI IMX178	monochrome
VK000477	VC MIPI IMX183	monochrome
VK000482	VC MIPI IMX183 C	color
VK000478	VC MIPI IMX226	monochrome
VK000499	VC MIPI IMX226 C	color
VK000481	VC MIPI IMX250	monochrome
VK000492	VC MIPI IMX250 C	color
VK004002	VC MIPI IMX252	monochrome
VK000493	VC MIPI IMX252 C	color
VK000511	VC MIPI IMX264	monochrome
VK000512	VC MIPI IMX264C	color
VK000514	VC MIPI IMX265	monochrome
VK000513	VC MIPI IMX265C	color
VK000487	VC MIPI IMX273	monochrome
VK000495	VC MIPI IMX273 C	color
VK000438	VC MIPI IMX290	monochrome
VK000434	VC MIPI IMX296	monochrome
VK003315	VC MIPI IMX296 C	color
VK003316	VC MIPI IMX297	monochrome
VK000435	VC MIPI IMX327 C	color
VK000503	VC MIPI IMX335	monochrome
VK000538	VC MIPI IMX335C	monochrome
VK004003	VC MIPI IMX392	monochrome
VK000494	VC MIPI IMX392 C	color
VK000437	VC MIPI IMX412 C	color
VK000498	VC MIPI IMX415	monochrome
VK000449	VC MIPI IMX415 C	color
VK000543	VC MIPI IMX568	monochrome
VK000565	VC MIPI IMX568C	color
VK000601	VC MIPI IMX900	monochrome
VK000609	VC MIPI IMX900C	color

Order Number	Product / Service description
EK003260	Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 22 Pin
EK003261	Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 15 Pin
EK004418	Flexible Printed Circuit (FPC) Cable, 100 mm: 22 to 22 Pin
EK040001	Flexible Printed Circuit (FPC) Cable, 60 mm: 22 to 22 Pin
VK000057	S-Mount Lens Holder for OV7251, OV9281, IMX290, IMX296, IMX297, IMX327, IMX335, IMX412, IMX415 (no IR filter)
VK000545	S-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (with IR-Cut filter 750 nm)
VK000568	S-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (no IR filter)
VK000555	S-Mount Lens Holder for IMX178, IMX226, IMX273, IMX568 (no IR filter)
VK000454	CS-/C-Mount Lens Holder for OV7251, OV9281, IMX290, IMX296, IMX297, IMX327, IMX335, IMX412, IMX415 (no IR filter)
VK000483	C-Mount Lens Holder for IMX183, IMX252, IMX250, IMX392, IMX264, IMX265 (no IR filter)
VK000491	CS-/C-Mount Lens Holder for IMX178, IMX226, IMX273, IMX568 (no IR filter)
VK000021	Lens, S-Mount Monochrome, f=8.0
VK000252	Lens, S-Mount Monochrome, f=3.6, F=1.8, 2–3 MPx
EK002697	Lens, S-Mount Monochrome, f=8.0, F=5.6
VK003117	Lens, S-Mount Monochrome, f=8.0, F=2.5, 1:1.8" macro
VK003137	Lens, S-Mount Monochrome, f=6.0, F=2.4, 1:2", 2–3 MPx
VK002066	Lens, S-Mount Monochrome, f=12.0, F=2.8, 1:2.5", 5 MPx
VK001256	Lens, S-Mount Color (IR filter), f=2.4, F=2.0, 1:3"
EK000625	Circular IR-Cut Filter Glass 750 nm, d=16 mm
EK003348	VC MIPI 96 Adapter Board for '96' Boards
VK003318	VC MIPI Repeater Board

Page Comparison

Versions Compared

Old Version 17

New Version Current

Key

1. General Information

1.1 Hardware Compatibility

1.2 Technical Specification

[R]

1.3 Electrical and Mechanical Prerequisites

1.4 Pin Cable Connector for Vision Components MIPI CSI camera modules

1.4.1 Flexible Printed Circuit (FPC) Cable

1.4.1.1 FPC Cable End to MIPI Camera Sensor

1.4.1.2 FPC Cable End to Processor Board

1.5 MIPI Sensor Module Circuit

1.6 Trigger Timing

2 Ordering Information

2.1 MIPI camera module order numbers

2.2 Order numbers of MIPI camera module Accessories

3 Appendix A: Dimensions MIPI camera module

3.1 VC MIPI IMX296 (same board dimensions for OV9281, OV7251, IMX290, IMX297, IMX327, IMX335, IMX412, IMX415, IMX568)

3.2 VC MIPI IMX183 (same board dimensions for IMX250, IMX252, IMX264, IMX265, IMX392)

3.3 VC MIPI IMX226 (same board dimensions for IMX178, IMX273)

3.4 VC MIPI IMX565 (same board dimensions for IMX566, IMX567)

`1.4.1.1 FPC Cable End to MIPI Camera Sensor`

`1.4.1.2 FPC Cable End to Processor Board`

`1.5 MIPI Sensor Module Circuit`

`3 Appendix A: Dimensions MIPI camera module`

`3.1 VC MIPI IMX296 (same board dimensions for OV9281, OV7251, IMX290, IMX297, IMX327, IMX335, IMX412, IMX415, IMX568)`

`3.2 VC MIPI IMX183 (same board dimensions for IMX250, IMX252, IMX264, IMX265, IMX392)`

3.3 VC MIPI IMX226 (same board dimensions for IMX178, IMX273)

3.4 VC MIPI IMX565 (same board dimensions for IMX566, IMX567)