Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

  1. Hardware Setup
    1.1 Hardware Pre-Check: Install Raspbian
    1.2 Connect the MIPI module
    1.3 Optional: Trigger input (if supported)
    1.4 Optional: Connect a second MIPI module
    1.4.1 Additional cable setup

  2. Software Setup
    2.1 Get the driver and demo code
    2.2 Install necessary Raspberry Pi OS packages
    2.3 Driver Installation
    2.4 First Image Acquisition Test
    2.5 Running the Demo
    2.5.1 Compile the programs
    2.5.2 Execute the demo
    2.6 Switching Sensor Configuration
    2.6.1 Sensor modes
    2.6.2 Sensor modes description
    2.6.3 IO configuration
    2.6.4 Self-triggered mode

  3. Troubleshooting and Background Information
    3.1 Q/A
    3.2 Driver Knowledge
    3.2.1 Providing device tree overlays
    3.2.2 Set up the I²C bus for driver-sensor communication
    3.2.3   Providing the sensor driver as kernel module
    3.2.4   Reserving Contiguous Memory for the Image Captures

  • No labels