If you want to stop measure angles send the following parameters:

  1. Sensor Parameters (CMD_RECEIVE_SENSOR_DATA - ID 43)

    NbrLines = 0
    OR
    Use the "STOP" command (CMD_STOP 0).
    Later we will adapt the ROI (region of interest) parameter that it fits to the V-die. See following chapter.

        J00_PolygonPoint_X00_MM = -500.0
    J00_PolygonPoint_Z00_MM =    0.0
    J00_PolygonPoint_X01_MM =  500.0
    J00_PolygonPoint_Z01_MM =  500.0

    For that you have to know the mounting position (R, X and Angle) of the individual sensor.