If you want to measure angles send the following parameters:

  1. Product Parameter (CMD_RECEIVE_PRODUCT_DATA - ID 40)

                J00_ProductType = 1
              J00_PolygonNr = 2
    J00_PolygonPoint_X00_MM = -500.0
    J00_PolygonPoint_Z00_MM =    0.0
    J00_PolygonPoint_X01_MM =  500.0
    J00_PolygonPoint_Z01_MM =  500.0

  2. Sensor Parameters (CMD_RECEIVE_SENSOR_DATA - ID 43)

        DataMode  =  8
    NbrLines  =  -1

You will permanent get a result strings like:

JOB 0.0001: Phi=156.36 Cx=00.4011 Cy=-0.9161 B=-0104.19 LAlgo=2 Points=0501 DetLen=042.6 Filter=100 dPhi=0.03 Error=0 Sh=0012us Gain=000 TimeStamp=0000006468167ms

For accuracy reason ignore the first 5-10 angles after a new plate or ROI is defined, as the auto exposure takes some images for adaption.