4. Mounting Position X, R and Angle
- Wilhelm Scheermann
- Anida Salaj (Unlicensed)
The camera mounting parameters X-Position, R-Position and Angle has to be very precise to your real sensor mounting position.
You will need these mounting position values (X, R, Angle) as an input for your press brake controller. Especially the Angle has to be very accurate as it has a direct influence to your output angle result.
Typical values for X, R and Angle are:
| Front Sensor: | Back Sensor: |
|---|---|---|
X | < 0, for example -110 mm | > 0, for example +110 mm |
R | < 0, for example -40 mm | < 0, for example -40 mm |
Angle | < 0, for example -30 degrees | > 0, for example +30 degrees |
If you don’t know the mounting Angle of your sensor exactly, you have two options:
Automatic detection of mounting position
Manual detection of mounting position
Please have a look at the chapter “Recommended Mounting Positions” for the location of X, R and Angle.