2. IP Address

Open

Master port for machine: 1096
Slave port for debug: 1097

Typically you need two sensors – the front and back sensor. Every sensor must have a different IP address.

Choose the IP address range which fits to your machine and is not already in use. You have to insert the IP addresses also in your press brake controller.

The sensor already comes with the latest software version.

Optional four sensors - two sensor pairs - are possible, if you have a long plate and you want to measure it on different positions (left and right).

Normally this is not used as the OEM prefers a W-axis (sensor movement along the Y-axis direction)