...
Table of Contents
1.3 Connectors
1.3.1 Jumper field
1.3.2 Connecting the board
2.1 MIPI camera module order numbers
2.2 Order numbers of MIPI camera module Accessories
3. Appendix A: Dimensions MIPI Repeater Board
1 General Information
1.1 Hardware Compatibility
The VC MIPI Repeater Board is intended to be inserted into a VC MIPI signal link. It allows extending the cable length between the VC MIPI sensor and the host processor. It also makes it possible to access both hardware trigger input and flash output signals from the VC MIPI Module without soldering.
1.2 Technical Specification
Technical Data
Component / Feature | Specification |
|---|---|
Number of lanes | 1–4 depending on sensor module |
MIPI speed | max. 1.5Gbps |
Flash output signal | 3.3V LVCMOS |
Trigger input signal | 3.3V LVCMOS |
Storage Conditions | Temperature: -20 to +60 deg C, Max. humidity: 90%, non condensing. |
Operating Conditions | Temperature: 0 to +50 deg C, Max. humidity: 80%, non condensing. |
Power Consumption | approx. 200mW @ 3.3V drawn from the host over the VC MIPI Cable |
1.3 Connectors
1.3.1 Jumper field
The board contains a jumper field with access to
...
If you need to access to the signals, remove the jumpers and connect the signals with a 2mm MOLEX cable header with the jumper field. Make sure to use the GND pin as a reference level. If necessary it is possible to supply the 3.3V to your circuit from the VC MIPI Repeater Board.
...
1.3.2 Connecting the board
...
Connect the VC MIPI Repeater Board as shown in the figure Connecting the board:
...
| Note |
|---|
Make sure to connect the board as shown in the image and described at the text. Otherwise the hardware will be damaged. |
2 Ordering Information
2.1 MIPI camera module order numbers
VC MIPI camera modules
Order Number | Product ID / Service description |
|---|---|
VK003318 | VC MIPI Repeater Board — do not forget to order the appropriate FPC cable! |
2.2 Order numbers of MIPI camera module Accessories
Accessories for VC MIPI camera modules
Order Number | Product / Service description |
|---|---|
EK003260 | Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 22 Pin |
EK003261 | Flexible Printed Circuit (FPC) Cable, 200 mm: 22 to 15 Pin |
3 Appendix A: Dimensions MIPI Repeater Board
...